Set A Recurrent Alarm; Set The Snooze Time; Respond To An Alarm - Cisco IP DECT 6800 Series User Manual

Set a Recurrent Alarm

Set a Recurrent Alarm
You can set your handset to remind you at a specific time each day with a recurrent alarm timer. You can set
only one recurrent alarm on the handset.
Procedure
Step 1 Press Menu
Step 2 Select Alarms
Step 3 Set the time for the alarm.
Press right or left on the Navigation ring
ring to increment or decrement the field.
Step 4
Press Save .
Step 5 Highlight each day of the week for the alarm and press Mark.
Step 6
Press Ok.

Set the Snooze Time

When an alarm rings, you can press Snooze to make the alarm ring again at the configured time. By default,
the delay is 10 minutes, but you can set any delay from 1 minute to 10 minutes.
Procedure
Step 1 Press Menu
Step 2 Select Alarms
Step 3
Select the snooze time.
Step 4 Press Select .

Respond to an Alarm

At the configured alarm time, the handset rings and you respond to the alarm. If you are on a call, the alarm
doesn't ring through until you end the call.
Cisco IP DECT 6800 Series User Guide
50
.
> Recurrent Alarm.
.
> Snooze time.
to move from field to field. Press up or down on the Navigation
Alarms, Alarm List, and F-Keys