Select An Apn To Use; Remove An Apn Entry - NETGEAR AirCard 797 User Manual

Note: PDP roaming protocol is the IP protocol used while you are roaming (for
example when you are traveling and the roaming network does not support IPv6).
10. Click the Save button.
The entry is added to the table.

Select an APN to Use

1. From a computer or Wi-Fi device that is connected to the mobile hotspot, launch a
web browser.
2. Enter http://attwifmanager/.
The mobile hotspot web page displays.
3. Enter the administrator login password.
The default password is attadmin. The password is case-sensitive.
The home page displays.
4. Select Settings > Mobile Broadband > APN.
5. Select the Active radio button next to the APN entry.
The APN is selected.

Remove an APN Entry

1. From a computer or Wi-Fi device that is connected to the mobile hotspot, launch a
web browser.
2. Enter http://attwifmanager/.
The mobile hotspot web page displays.
3. Enter the administrator login password.
The default password is attadmin. The password is case-sensitive.
The home page displays.
Maintain Your Mobile Hotspot
AirCard 797 Mobile Hotspot
To select an APN to use:
To remove an APN entry:
63 User Manual