Configure Mobile Broadband; Enable Ip Pass-Through Mode - NETGEAR AirCard 797 User Manual

Configure Mobile Broadband

You can configure mobile broadband settings to view WAN details such as the active
network, connection status, and signal strength. You can also adjust these settings to
establish which users and applications can access your network.

Enable IP Pass-Through Mode

To turn off the mobile hotspot router functionality and assign the network IP address
directly to the attached device, enable IP pass-through.
If you make this change, the attached device restarts using a different driver
configuration.
Warning:
If you enable this feature, Wi-Fi is disabled and you must use a USB cable to
tether the device.
Note: This feature is available to Windows computer users. If you are a Mac user, do
not enable this option because you will be unable to access your device.
To enable IP pass-through mode:
1. From a computer or Wi-Fi device that is connected to the mobile hotspot, launch a
web browser.
2. Enter http://attwifmanager/.
The mobile hotspot web page displays.
3. Enter the administrator login password.
The default password is attadmin. The password is case-sensitive.
The home page displays.
Maintain Your Mobile Hotspot
AirCard 797 Mobile Hotspot
59 User Manual