Select An Apn To Use - NETGEAR Nighthawk 5G User Manual

7. Select the network authentication mode:
• None
• PAP
• CHAP
• PAP or CHAP
8. Change the PDP (data protocol), if necessary:
• IPV4
• IPV6
• IPV4V6
9. Change the PDP roaming protocol, if necessary:
• None
• IPV4
• IPV6
• IPV4V6
Note: PDP roaming protocol is the IP protocol used while you are roaming (for
example when you are traveling and the roaming network does not support IPv6).
10. Click the Save button.
The entry is added to the table.

Select an APN to Use

To select an APN to use:
1. From a computer or Wi-Fi device that is connected to the mobile hotspot, launch a
web browser.
2. Enter http://192.168.1.1:8080 or http://192.168.2.1:8080.
The mobile hotspot web page displays.
3. Enter the administrator login password.
The default password is attadmin. The password is case-sensitive.
The home page displays.
4. Select Settings > Mobile Broadband > APN.
Maintain Your Mobile Hotspot
Nighthawk 5G Mobile Hotspot
46 User Manual