Turn Guest Wi-Fi On And Off From The Mobile Hotspot Web Page - NETGEAR AirCard 797 User Manual

10. To allow the Wi-Fi information to be displayed on the mobile hotspot home screen,
leave the Wi-Fi Info on Home check box selected.
11. Set the Wi-Fi range.
Selecting the Extended radio button expands the range of the mobile hotspot. This
setting uses more battery power than the Standard setting.
12. Specify advanced connection settings:
• RTS Threshold. The smallest packet size (in bytes) used by the Request to
Send/Clear to Send handshaking protocol.
Best practice is to use a value of 2347. If you are experiencing inconsistent data
flow, you can make minor changes to this value to try to alleviate the problem.
• Fragmentation Threshold. The largest allowable size (in bytes) for a packet.
If a packet is larger than the threshold, it is sent in multiple packets, which can
affect network performance. Keep this value as large as possible (up to 2346).
13. Click the Save button.
A message displays to tell you that changing the Wi-Fi info will temporarily cause
connectivity loss.
14. Click the OK button.
Your settings are saved.
Turn Guest Wi-Fi On and Off From the Mobile Hotspot Web
Page
Guest Wi-Fi lets temporary visitors access your Wi-Fi mobile hotspot without having to
share your main Wi-Fi password. Guest Wi-Fi uses the same band (2.4 GHz or 5 GHz)
as your main Wi-Fi.
To enable guest Wi-Fi from the mobile hotspot web page:
1. From a computer or Wi-Fi device that is connected to the mobile hotspot, launch a
web browser.
2. Enter http://attwifmanager/.
The mobile hotspot web page displays.
3. Enter the administrator login password.
The default password is attadmin. The password is case-sensitive.
The home page displays.
Use Your Mobile Hotspot
AirCard 797 Mobile Hotspot
31 User Manual