Sleep Mode; Status Led; Set Up Your Mobile Hotspot - NETGEAR AirCard 797 User Manual

AirCard 797 Mobile Hotspot
Turn mobile hotspot off. Press and hold the Power button for 3-4 seconds
Wake up WiFi signal and device screen. Press and release the Power button.
Cycle through screens. Press and release the Power button.

Sleep Mode

If there have been no transmissions or operation of your device, or if the battery has
not been charged, your device automatically enters sleep mode to save power.
In sleep mode, WLAN is disabled.
Press the Power button to turn the display on and exit sleep mode.
WLAN function is enabled and WiFi devices can reconnect to the hotspot.
The time required to recover the network connection varies by environment, settings,
etc.

Status LED

The status LED indicates data connection status:
• Blue, slow blink. The mobile hotspot is ready.
• Blue, double-blink. The mobile hotspot is transferring data.
• Amber, slow blink. The mobile hotspot is not connected to the network or is in
standby mode.

Set Up Your Mobile Hotspot

The mobile hotspot comes with a preinstalled SIM card.
Get Started 9 User Manual