Installation
4.5.2 Connecting FP-X Expansion FP0 Adapter
Please connect FP-X expansion unit in accordance with the following procedure.
Installation steps
PROCEDURE
1. Remove the control unit, the expansion unit expansion cover.
2. Install an expansion connector cable on the control unit expansion
connector portion and FP-X expansion FP0 adapter expansion connector
portion (left).
3. Units should be close together to ensure that the expansion cable is
housed between the units.
4. Install expansion cover.
KEY POINTS
•
The expansion FP0 adapter has no terminal setting switch, but the terminal
is set inside it. Set the terminal setting switch of other expansion units to
OFF.
4-10