Table of Contents
Advertisement
Setting of Position Control Parameters
9.5 Saving and Managing Files
9.5.1 File Type
The set parameters and positioning table information can be saved or exported in the
following three formats.
File name
FPWIN GR7 project
file
Configurator PM7
file
CSV file
9.5.2 Saving Parameters as Part of Project File
Parameters set by Configurator PM7 can be saved as part of project data. The following
procedure is explained on the condition that the Configurator PM7 has already started.
PROCEDURE
1. Select "File" > "Apply Setting" from the menu bar.
A confirmation message box is displayed.
2. Press the [Yes] button.
Parameters are saved as part of the project data being edited on the FPWIN GR7.
3. Select "File" > "Exit" from the menu bar.
It returns to the base screen of FPWIN GR7.
4. Select "Project" > "Save As" from the FPWIN GR7 menu bar.
The "Save As" dialog box is displayed.
5. Enter a saving destination and file name, and press [Save] button.
The parameters are saved as a FPWIN GR7 project file (extension (.fpx)).
9-14
Extension
Application
Save parameters set by the Configurator PM7
.fpx
together with programs and system registers as part
of project data.
Save parameters set by Configurator PM7 as files.
.pm7r
The saved data can also be reused in multiple units
and projects.
Export parameters set by Configurator PM7 in csv
.csv
format. They can be used for checking parameters.
Operation of
Configurator
PM7
Apply Settings
Save Setting
Read Setting
Export to CSV
Advertisement
Table of Contents
