Starting Operations In Manual Mode; Volume Function; Factory Default Setting - Breville Smart Scoop BCI600 Instruction Book

STARTING OPERATIONS IN
MANUAL MODE
1. Ensure that the machine is in MANUAL
mode.
2. Set the time that you desire by pressing the
MANUAL buttons up or down
3. Press START | PAUSE button for the ice
cream making process to start. The light
around this button will illuminate red to
indicate that the button has been selected
and the machine has now started the
churning process.
4. When the desired time has been reached
the compressor and motor will stop. READY
will illuminate and REMOVE BLADE will
flash on the LCD display. The selected tone
will sound to alert the user that the dessert
is ready.
5. The timer adjust can be done at any time.
NOTE
• The READY will illuminate and REMOVE
BLADE will flash for 10 minutes only, and
then turn off. It can also be turned off ahead
off this time by pressing any button or dial.
10 minutes after the timer has elapsed, the
screen will revert back to original screen
before 'START | PAUSE' was pressed.
• If the START | PAUSE button is pressed
during the cycle this will pause the time.
To resume the process press the button again.
• If you need to reset the timer press and hold
the START | PAUSE button for 2 seconds and
this will reset the time.

VOLUME FUNCTION

The Breville Smart Scoop™ features a Volume/
Tone selection which includes music or a
beep to indicate your frozen dessert is ready.
The volume will default to high which can be
adjusted to low or mute. Your music selection
.
includes:
• Turkey in the Straw
• The Entertainer
• Camptown Races

FACTORY DEFAULT SETTING

Press and hold the KEEP COOL button for
5 seconds. This will restore the machine back
to the original factory settings. This can only
be done in the stand by mode.
15