Adjust The Screen Timeouts; Clean Screen - Honeywell Galaxy TouchCenter Plus Installer Manual

Adjust the Screen Timeouts

When the keypad is left idle, it automatically:

Turns the backlight off after the selected backlight off time has expired (unless the

Returns to the Home screen after the selected
selected), and

If enabled, the
Auto Slideshow After
Note: In you can only adjust the backlight off after time.
EN50131 Mode
To select the desired screen timeouts:
ICON
1. On the
Home
then enter an authorised code.
2. Press the Display Setup
3. Press the desired timeout button.
4. Use the up/down arrow buttons to change the
timeout.
5. Press the Save

Clean Screen

With the exception of normal cleaning, the keypad is maintenance free.
Press the icon, and do the following:
Display Setup
ICON
1. Press the
Clean Screen
displays Touch Screen has been disabled so that
you may wipe the screen clean. Please use a
damp, soft cloth. DO NOT use any liquids,
sprays, or ammonia-based cleansers. Press
CONTINUE to disable touchscreen
2. Press
Continue
IMPORTANT: Do not use an abrasive cleaning agent or abrasive cloth when cleaning the keypad or damage to the
touch screen may occur.
Setup (cont'd)
To Homepage After
time begins the slide show.
ACTION
screen, press the icon, and
Setup
icon.
icon.
ACTION
icon. A popup window
.
, and then wipe the screen.
time has expired (unless
Settings include:

Backlight Off After time

Return To Homepage After time

Auto Slideshow After time
When the Continue icon is pressed the
message Touch Screen Disabled for =30
Seconds is displayed. During these 30
seconds the touch screen should be wiped
clean of fingerprints using a mild soap solution
and a soft cloth. When the counter reaches
zero, the window automatically closes and the
touch screen is active.
14
Never option is selected).
Never option is
NOTES
NOTES