Setup; Brightness And Volume Control; Display Setup; Language Selection (If Applicable) - Honeywell Galaxy TouchCenter Plus Installer Manual

This section describes how to use the brightness and volume controls, and how to select the language and adjust the
screen timeouts.

Brightness and Volume Control

To set the brightness and volume:
ICON
1. On the
Home
then enter an authorised code.
2. Move the
Brightness
or down to increase or decrease the settings.
3. Press the
Save

Display Setup

On the Display Setup screen you can access
After , and Clean Screen .

Language Selection (if applicable)

The Galaxy TouchCenter Plus can display ten different languages.
To change the language:
ICON
1. On the
Home
then enter an authorised code.
2. Press the
3. Press the
up/down arrow buttons, select a language.
4. Press the
5. Press
OK
ACTION
screen, press the

Setup

and/or
Volume
icon.
Language
ACTION
screen, press the
Setup
icon.
Display Setup
button and then, using the
Language
Save icon.
.
Setup
If changes are made, when you exit a pop-up
icon, and
window displays:
Information
slide bars up
Settings saved
, Backlight Off After , To Homepage After
After step 4, the following message is
icon, and
displayed:
Information
Language has been changed
Press OK or Cancel
13
NOTES
, Auto Slideshow
NOTES