Ip Setup And Network Connections - Honeywell Galaxy TouchCenter Plus Installer Manual

IP Setup and Network Connections

IP Address Setup
In most cases, IP addresses are assigned automatically (the
static (fixed) IP address that can be found by accessing your router. Refer to your router instructions.
Setup a LAN Connection
On the IP Setup screen, add a LAN network connection as follows:
ICON
1. Connect an Ethernet cable between the
router and the keypad and setup any video
cameras.
2. On the
Home
and then enter an authorised code.
3. Press the
4. Press the
5. Press the
automatically updated.
6. Return to the
the information is displayed.
7. If the IP address is not displayed, change the
Internet Connection type
then manually enter the necessary IP
information from your router. Press the
icon; the IP information is
Save
automatically updated.
Initial Setup (cont'd)
ACTION
screen, press the
Setup
IP Setup icon.
LAN ON button.
icon: the IP information is
Save
screen. Check that
IP Setup
to , and
Static
setting). However, you may require a
Obtain address auto
icon,
A pop-up window displays:
This will switch off WLAN Network, do you want
to continue? Yes or No
11
NOTES