Configuration Examples For Marking; Feature History For Marking - Cisco Nexus 7000 Series Configuration Manual

Configuration Examples for Marking

Configuration Examples for Marking
The following example shows how to configure marking:
configure terminal
policy-map type qos untrust_dcsp
class class-default
set dscp 0
policy-map type queuing untrust_1Gport_policy
class type queuing 2q4t-in-q-default
set cos 0
policy-map type queuing untrust_10Gport_policy
class type queuing 8q2t-in-q-default
set cos 0

Feature History for Marking

The table below summarizes the new and changed features for this document and shows the releases in which
each feature is supported. Your software release might not support all the features in this document. For the
latest caveats and feature information, see the Bug Search Tool at
release notes for your software release.
Table 19: Feature History for Marking
Feature Name
set cos command
Cisco Nexus 7000 Series NX-OS Quality of Service Configuration Guide
58
Release
5.0(3)
Configuring Marking
https://tools.cisco.com/bugsearch/
Feature Information
Support for set cos command in ingress
policies.
and the