Example: Hierarchical Queuing Policy Configuration; Example: Verifying The Status Of Dscp-To-Queue Mapping; Feature History For Queuing And Scheduling For F-Series Modules - Cisco Nexus 7000 Series Configuration Manual

Example: Hierarchical Queuing Policy Configuration

Example: Hierarchical Queuing Policy Configuration
The following example shows how to configure a hierarchical queuing policy:
policy-map type queuing inner-policy-1
class type queuing 1p3q1t-out-q1
bandwidth percent 40
class type queuing 1p3q1t-out-q2
bandwidth percent 60
policy-map type queuing inner-policy-2
class type queuing 1p3q1t-out-q3
bandwidth percent 40
class type queuing 1p3q1t-out-q4
bandwidth percent 60
class-map type queuing drop-class
match class-map 1p3q1t-out-q1
match class-map 1p3q1t-out-q2
class-map type queuing nodrop-class
match class-map 1p3q1t-out-q3
match class-map 1p3q1t-out-q4
policy-map type queuing example-hierarchical-policy
class type queuing drop-class
bandwidth percent 40
service-policy type queuing inner-policy-1
match class nodrop-class
percent 60
service-policy type queuing inner-policy-2
•

Example: Verifying the Status of DSCP-to-queue Mapping

The following sample output from the show hardware qos dscp-to-queue ingress command displays the
status of DSCP-to-queue mapping enabled in ingress direction on F-series modules:
Switch# show hardware qos dscp-to-queue ingress
status: Enabled
module_type : f-series
Feature History for Queuing and Scheduling for F-Series
Modules
The table below summarizes the new and changed features for this document and shows the releases in which
each feature is supported. Your software release might not support all the features in this document. For the
latest caveats and feature information, see the Bug Search Tool at
release notes for your software release.
Cisco Nexus 7000 Series NX-OS Quality of Service Configuration Guide
132
Configuring Queuing and Scheduling on F-Series I/O Modules
https://tools.cisco.com/bugsearch/ and the