Applying Descriptions To Mqc Objects - Cisco Nexus 7000 Series Configuration Manual

Applying Descriptions to MQC Objects

Step 8
Applying Descriptions to MQC Objects
You can use the description command to add a description to a MQC object.
Procedure
Step 1
Step 2
Cisco Nexus 7000 Series NX-OS Quality of Service Configuration Guide
22
Command or Action
(Optional) switch(config)# copy
running-config startup-config
Command or Action
switch# configure terminal
Option Description
class-map [type qos] Creates or accesses
[match-any | the class map, and
match-all] then enters class-map
class-map-name mode. The class-map
name can contain
alphabetic, hyphen, or
underscore characters,
is case sensitive, and
can be up to 40
alphanumeric
characters.
table-map Creates or accesses
table-map-name the table map, and
then enters table-map
mode. The table-map
name can contain
alphabetic, hyphen, or
underscore characters,
is case sensitive, and
can be up to 40
characters
policy-map [type Creates or accesses
the policy map, and
qos] [match-first]
{qos-policy-map-name then enters policy-map
mode. The policy-map
| qos-dynamic}
name can contain
alphabetic, hyphen, or
underscore characters,
is case sensitive, and
can be up to 40
characters.
Using Modular QoS CLI
Purpose
Saves the running configuration to the startup
configuration.
Purpose
Enters global configuration mode.