Lp Options - Hitachi CB 520H A1 User Manual

LP Options

The following functions are available in the LP Options screen. Example of LP
Options screen is below.
The following table describes each item on this screen.
No.
(1)
(2)
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 7-75 LP Options Status Screen
Table 7-34 Details of the LP Options Status Screen
Item
Pre-State Auto Specifies whether or not to return the
Activation LPARs to their status before rebooting
when LPAR manager is rebooted
without shutting down the LPAR
manager system.
Yes: Restores the LPAR to the status it
had before the LPAR manager system
reboots.
No: Does not restore the LPAR to the
status it had before the LPAR manager
system reboots.
LP Auto Specifies whether or not shut down the
Shutdown LPAR manager system if all LPARs have
become deactivated.
Yes: Shuts down the LPAR manager
system.
No: Does not shutdown the LPAR
manager system.
Operation by LPAR manager Screen
Description
Supported
Default LPAR
Value manager
Version
No 01-0X~
No 01-0X~
7-105