Info Level - Hitachi CB 520H A1 User Manual

Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do

Info Level

Message Content
Explanation
What to do
Message Content
Explanation
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
The temporary LP license has expired.
The temporary LP license has expired.
The following operations are suppressed.
• Operation to activate LPARs
• OS startup after reactivating LPARs
• OS startup after restarting OSs
• Operations that include the operation to activate LPARs (such
as boot order configuration and boot device acquisition)
Purchase an LP license, or use the LPAR manager as an Essential
model by performing the following steps:
1 Stop the LPAR manager.
.
2 Back up the LPAR manager configuration.
.
3 Update the LP license by using the management module
.
firmware A0270.
4 Start the LPAR manager.
.
For details about updating an LPAR manager license, see
Upgrading LPAR manager model in the manual Hitachi Compute
Blade 500 Series Management Module Setup Guide.
Thermal error occurred.
A temperature rise warning event occurred.
Remove the dust of the air vent of the system device to improve
ventilation. If this LPAR manager event log is collected although
ventilation is improved, contact the reseller from which you
purchased this equipment or consult maintenance personnel.
Unknown event occurred.
An unknown event was obtained.
Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
An information-level event occurred on the LP
An information-level event occurred on the LPAR manager.
No particular action required. For more detail, see the adjacent
LPAR manager system log, which is described in the details of this
event.
Configuration will not be saved during safe mode.
Configuration information cannot be saved while LPAR manager is
running in safe mode.
Messages
9-45