Lpar Manager Dump Collection Command - Hitachi CB 520H A1 User Manual

• The transfer data to an FTP server is supported only an IP address in IPv4
format.

LPAR manager Dump Collection Command

Outline of LPAR manager Dump Collection Command
LPAR manager dump is collected by executing an LPAR manager dump
collection command which is included in HVM management commands
(HvmSh). When the LPAR manager dump collection command is executed on
the LPAR manager management server, the LPAR manager performs LPAR
manager dump and transfers the collected dump data to the external FTP
serve specified in the LPAR manager dump collection command to save it as a
file. The figure below shows a schematic diagram when the LPAR manager
dump collection command is executed.
Item
Dump
collection
target
Dump volume Up to 16 MB (The Gzip-compressed data size of two blocks of dump )
User
operation
method
Dump output
server
Dump data
transfer
method
4-6
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 4-2 Memory Dump of LPAR manager
Table 4-2 Functions of LPAR manager Memory Dump
LPAR manager
Executes LPAR manager dump collection command on the LPAR manager
management server.
External FTP server specified by the LPAR manager dump collection
command (The server that executes the LPAR manager dump collection
command is also available.)
Memory dump data is transferred from the LPAR manager machine to
the external FTP server through the management LAN. The LPAR
manager dump data are compressed and a GZIP file is created by the
LPAR manager machine, and the file is transferred to the external FTP
server using the FTP protocol.
Maintenance Functions
Function