Warn Level - Hitachi CB 520H A1 User Manual

Message Content
What to do
Message Content
Explanation
What to do

Warn Level

Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
VNIC damage occurred.
Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
VNIC damage on LP Assist occurred.
A virtual NIC (LPAR manager Assist) fault occurred.
Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
A caution-level event occurred on the LP.
A caution-level event occurred on the LPAR manager.
See the adjacent LPAR manager system log, which is described in
the details of this event.
An abnormal time difference was detected.
An abnormal time difference was detected when the LP time had
been synchronized automatically with NTP server.
Take action as follows:
• Check the status of the NTP server.
• If there is no problem with the NTP server, disable time
synchronization in the Date and Time screen, and set the
original values to restart time synchronization.
• Check the LPAR manager system time and OS system time.
Then, if necessary, use an OS command or Adjust LPAR Time
to set the logical RTC time of the LPAR.
Guest dump failed.
Guest memory dump failed.
To get the information on the failure and its factors, execute the
command "Get guest memory dump progress" of HVM
management command (HvmSh command). Deal with the
problem according to "Status Codes and Messages" displayed by
this command.
H/W Corrected MCK occurred.
A corrected machine check event occurred.
None.
Messages
9-37