Transmitter Display Configuration; Table 7 - Local Display Configuration Parameters - Honeywell ST 800 Series User Manual

Transmitter Display Configuration

From the DE MAIN MENU, select the Local Display button. The LOCAL DISPLAY box will
be displayed.
Select display parameters from the options listed in Table 7
Parameter
Display Hardware
Display Units
Custom Units Tag
Flow EU Upper Value
Flow EU Lower Value
Select the Back button to go back to the DE MAIN MENU.
Page 18
Table 7 – Local Display Configuration Parameters
Read (R) or
Read/Write Configuration Details
(R/W)
Type of Transmitter Display:
R
Engineering Units for this Display:
%,
psi, KPa
R/W
Bar
mHg@0
GPH
8 Characters
R/W
Note that the Custom Units Tag is not sent to the
Display. It will be displayed in the Tool.
4.3.1 R/W
R/W Floating point (for square root configurations)
ST 800 Series HART/DE Option User's Manual
•
Full Functional Display
•
No Display installed
inH2O@39
MPa,
g/cm2, kg/cm2
o o
C mH2O@4
Custom
4.3.2 Floating point (for square root configurations)
o o
F mmHg@0 C
mBar,
o
mmH2O@4 C
C GPM
Revision 5.0