Honeywell ST 800 Series User Manual page 53

Read Screen Info
Online/Device
Screen
Setup/Display
Configuration
Setup
(Continued ...)
(for Basic Display
Only)
Common Setup
PILD
Functionality
Online/Device
Setup/Upgrade Dev Id
Options
Enter License
Key
Online/Device
Setup/Review
Revision 5.0
Displays configured information for each of the eight
display screens. Select a screen number to view details of
the configurations selected in the "Screen Configuration"
menu.
The display screen may be customized with the following
settings:
PV Selection: select the displayed process variable as:
Differential Pressure
Loop Output
Percent Output
Pressure Units: select desired standard pressure unit.
Number of Decimals: select the number of decimal
places for the PV display from none to 3.
Custom Tag: enter a custom tag name for the screen
title up to 14 alphanumeric characters.
The following screen options are available:
Rotation Time: Set the length of time the PV display is
visible before rotating to another screen (such as a
diagnostic display). Select from 3 to 30 seconds.
Contrast Level: Select a display contrast level from
1(low) to 9 (high) or choose the "default" (5).
Provides information to user to if PILD functionality which is
an optional feature is Available or Not-Available.
This is the Device identification which user needs to provide
to get valid License Key for upgrading new features like
PILD.
License Key used to enable specific feature or function
Displays the current values for all of the pertinent operating
parameters listed in this table, plus revision information.
Parameters are not configurable in this menu.
ST 800 Series HART/DE Option User's Manual Page 45