Monitor Status Configuration; Table 8 - Monitor Parameters - Honeywell ST 800 Series User Manual

Monitor Status Configuration

With the DE MAIN MENU displayed, select the Monitor button. The MONITOR box will be
displayed.
MONITOR status parameters are R (read only); Error! Reference source not found. lists the status
parameters.
Read (R) or
Parameter
Read/Write (R/W)
Input
Output
SV
Gross Status
Communication
Status
Select the Back button to go back to the DE MAIN MENU.
Revision 5.0
Table 8 – Monitor Parameters
Configuration Details
R Sensor input in EU
R Loop output as a percent of Span
R Secondary Variable in SV EU
Gross Transmitter Status. Select the Monitor menu
R
Device Status button to display device status.
Refer to the "Messages and Diagnostic Codes" section
R
of the MCT202 Toolkit manual.
ST 800 Series HART/DE Option User's Manual Page 19