Ethernet Cradle/Usb Cradle - Casio DT-X8-20C-CNV Hardware Manual

DT-X200 Hardware Manual

3.2.2. Ethernet Cradle/USB Cradle

No. Name
1 USB Client Port
2 USB Host Port
3 LAN Connection Status
LED(Only Ethernet
Cradle)
4 LAN Communication
Status LED(Only
Ethernet Cradle)
5 LAN Port (Only Ethernet
Cradle)
6 AC Adaptor Jack
7 Power Switch
8 Selector Switch
9 Power/Signal Terminal
10 Terminal Detect Switch
11 Cradle Mound Hooks
12 Power LED
Description
This port is used to transmit data (download, upload) by connecting the Ethernet
Cradle to PC using USB cable (DT-380USB-A). The dedicated driver must be
installed in the PC before connecting the cradle to the PC.
This port is used to connect a USB peripheral device.
This LED shows the LAN connection status.
Off : LAN cable not connected correctly.
On in Green : LAN cable connected correctly.
This LED shows the LAN operation status.
Off : No communication.
Flashing : Communication in progress.
This port is used for connecting the cradle to PC or hub via LAN cable so that
data can be transmitted (uploaded or downloaded). The special driver must be
installed in the terminal.
Connect the dedicated AC adaptor, AD-S42120B, here.
Turns on and off the power.
This switch is used to switch between USB connection and LAN connection.
Used for USB communication or to supply power to the terminal and to charge
the battery pack via Cradle.
This switch detects when the terminal is mounted correctly on the cradle.
Used to hook the terminal in the cradle.
This LED indicates the power status and the mounting status of the terminal.
Off : The terminal is not mounted. Or, the AC adaptor is not
connected.
On in Green : Power is turned on, and the terminal is correctly set in the
cradle.
CASIO COMPUTER CO., LTD.
P.22