Non-Lockable Wall Mount Components For Phone With Key Expansion Module; Cisco Unified Ip Phone 8961, 9951, And 9971 Administration Guide For Cisco Unified Communications Manager - Cisco 9971 Administration Manual

Procedure
Step 1 Push the screw drivers into the left and right holes in the phone mounting plate approximately 1 in. (2.5 cm).
Step 2 Lift the screwdriver handles up to put a downward pressure on the tabs.
Figure 23: Disengage Tabs
Step 3
Press firmly to disengage the tabs and lift the phone at the same time to release the phone from the wall bracket.

Non-Lockable Wall Mount Components for Phone with Key Expansion Module

This section describes how to install the ADA Non-Lockable Wall Mount Kit for 8961 Series and 9900 Series
IP Phones with Key Expansion Module on a Cisco Unified IP Phone 8961, 9951, and 9971 when the phone
is connected to a Key Expansion Module.

Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0

Non-Lockable Wall Mount Components for Phone with Key Expansion Module
145