Makita DSP600 Instruction Manual page 9

Battery indicator status
On Off
Indicating the remaining battery
capacity
Only for battery cartridges with the indicator
1. Indicator lamps 2. Check button
Press the check button on the battery cartridge to indi-
light up for a few seconds.
Indicator lamps
Lighted Off
Remaining
battery
capacity
Blinking
50% to 100%
20% to 50%
0% to 20%
Charge the
battery
1
2
Remaining
capacity
Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
may have
malfunctioned.
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
Automatic speed change function
NOTE:
depending on the work load. When the work load is low,
cutting operation. When the work load is high, the tool
operation.
1. Mode indicator
If the tool is operated with excessive load, the mode
blinking and then lights up or turns off if you reduce the
load on the tool.
Mode indicator status
On
CAUTION:
always tighten the clamping screw securely.
Loosen the clamping screw on the depth guide and
move the blade lower limit stopper to the desired depth
For cleaner, safer cuts, set cut depth so that no more
proper cut depth helps to reduce potential for dangerous
9 ENGLISH
1
Off Blinking
High speed
Operation
mode
mode
mode
Overload
alert