1. Manuals
  2. Brands
  3. Makita Manuals
  4. Saw
  5. DSP600
  6. Instruction manual

Makita DSP600 Instruction Manual

Cordless plunge cut saw
Hide thumbs Also See for DSP600:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual
INSTRUCTION MANUAL
Cordless Plunge Cut Saw
DSP600
DSP601
Read before use.

Advertisement

Table of Contents
loading

Related Manuals for Makita DSP600

Summary of Contents for Makita DSP600

  • Page 1 INSTRUCTION MANUAL Cordless Plunge Cut Saw DSP600 DSP601 Read before use.

  • Page 2: Specifications

    WARNING: Wear ear protection. Vibration Be sure that you understand their meaning before use. Read instruction manual. mined according to EN62841: Model DSP600 Work mode: cutting wood Only for EU countries Ni-MH or less Li-ion battery pack together with household waste...

  • Page 3: Ec Declaration Of Conformity

    Power tools can produce electromagnetic EC Declaration of Conformity However, users of pacemakers and other similar For European countries only medical devices should contact the maker of their to this instruction manual. this power tool. Personal Safety Stay alert, watch what you are doing and use SAFETY WARNINGS common sense when operating a power tool.
  • Page 4 It is an employer's responsibility to enforce Do not use a battery pack or tool that is dam- ments by the tool operators and by other per- may exhibit unpredictable behaviour resulting in sons in the immediate working area. Power tool use and care Do not force the power tool.
  • Page 5 When ripping, always use a rip fence or straight edge guide. of cut and reduces the chance of blade binding. Always use blades with correct size and shape Blades that do not match the mounting hardware of the saw will run off-centre, causing loss of control. ers or bolt.
  • Page 6 Assure that the base plate of the saw will not Some material contains chemicals which may shift while performing a “plunge cut”. Blade shifting sideways will cause binding and likely kick tion and skin contact. Follow material supplier back. safety data. Do not stop the blades by lateral pressure on blade before placing the saw down on bench the saw blade.
  • Page 7 Doing so may cause a malfunction of the wireless have been altered, may result in the battery bursting unit. also void the Makita warranty for the Makita tool and 18. Do not put any sticker on the wireless unit. charger.

  • Page 8: Functional Description

    Tool / battery protection system FUNCTIONAL DESCRIPTION matically stop during operation if the tool or battery is CAUTION: Always be sure that the tool is placed under one of the following conditions. When the tool is operated in a manner that causes it to cartridge draw an abnormally high current, the tool automatically stops.
  • Page 9 Battery indicator status Remaining NOTE: Depending on the conditions of use and the battery ambient temperature, the indication may differ slightly capacity from the actual capacity. Blinking 50% to 100% Automatic speed change function NOTE: 20% to 50% 0% to 20% depending on the work load.
  • Page 10 Loosen the clamping screws. Set for the desired angle by tilting accordingly, then tighten the clamping screws securely. 1. Blade lower limit stopper 2. Clamping screw Quick stop button for 2 to 3 mm depth of cut when using guide rail (optional accessory) 1.

  • Page 11: Switch Action

    When using the tool without guide rail screws and fully tilt the lever toward the direction of the base with your cutting line. For 45° bevel cuts, align the tighten the clamping screws. B position with it. When using the tool with guide rail For both straight cuts and 45°...

  • Page 12: Electronic Function

    6,300 min CAUTION: Use only the Makita wrench to CAUTION: for using low speed rated saw blades but for obtaining a speed which is suitable to material of workpiece. Use only saw blades which are rated...
  • Page 13 1. Hex bolt 2. 4. Circular saw blade WARNING: sure to install it on the spindle. When installing, 1. Lock-off button 2. Locking lever 3. Lock pin 4. Hole for lock pin into the saw blade hole perfectly. Mounting the blade on the wrong side can result in the dangerous Press the shaft lock fully so that the blade cannot vibration.

  • Page 14: Guide Rail

    When you wish to perform clean cutting operation, to be cut without the circular saw blade making any connect a Makita vacuum cleaner to your tool. Connect a hose of the vacuum cleaner to the dust nozzle using switch trigger. Wait until the circular saw blade attains the front cuff 24.
  • Page 15 1. Slide lever Sub base (Guide rule) Optional accessory 1. Clamping screw 2. Sub base By using the sub base as a guide rule, you can perform extra-accurate straight cuts. Loosen the clamping Plunge cutting (Cutting-out) screws and slide the sub base out from the tool then insert it upside down.
  • Page 16 Installing the wireless unit Starting the wireless activation function Installing the wireless unit Optional accessory CAUTION: surface when installing the wireless unit. NOTICE: Clean the dust and dirt on the tool before installing the wireless unit. Dust or dirt may cause malfunction if it comes into the slot of the wireless unit.
  • Page 17 When removing the wireless unit, open the lid slowly. as you pull up the lid. 1. Stand-by switch Press the wireless activation button on the vac- uum cleaner for 3 seconds until the wireless activation vation button on the tool in the same way. 1.
  • Page 18 Push the wireless activation button on the tool NOTE: in green after 20 seconds elapsed. Press the wireless activation button on the tool while the wireless acti- vation lamp on the cleaner is blinking. If the wireless activation lamp does not blink in green, push the wire- NOTE: When performing two or more tool registra- tion one by one.
  • Page 19 1. Wireless activation lamp meaning of the lamp status. Status Description Color Duration Blinking Standby Blue 2 hours lamp will automatically turn off when no operation is performed for 2 hours. When the tool is tool is running. running. Green 20 seconds Ready for the tool registration.
  • Page 20 If the cancellation is performed successfully, the wire- Cancelling tool registration for the less activation lamps will light up in red for 2 seconds and start blinking in blue. NOTE: Perform the following procedure when cancelling the red after 20 seconds elapsed. Press the wireless acti- tool registration for the vacuum cleaner.
  • Page 21 ment parts for repairs. State of abnormality Probable cause (malfunction) Remedy Install the wireless unit correctly. the tool. into the tool. Gently wipe off dust and dirt on the terminal of the the slot is dirty. wireless unit and clean the slot. Push the wireless activation button on the tool tool has not been pushed.

  • Page 22: Maintenance

    State of abnormality Probable cause (malfunction) Remedy Install the wireless unit correctly. along with the switch operation of the tool. the tool. into the tool. Gently wipe off dust and dirt on the terminal of the the slot is dirty. wireless unit and clean the slot.

  • Page 23: Optional Accessories

    OPTIONAL 0° ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool accessories or attachments might present a risk of 45° for its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service Center.
  • Page 24 J an- B apt i s t Vi nk s t r aat 2, M a k i t a E u r o p e N . V . 3070 K or t enber g, B el gi um 3- 11- 8, S um i y os hi - c ho, M a k i t a C o r p o r a t i o n A nj o, A i c hi 446- 8502 J apan...

This manual is also suitable for:

Dsp601

Table of Contents