Makita DSP600 Instruction Manual page 4

It is an employer's responsibility to enforce
ments by the tool operators and by other per-
sons in the immediate working area.
Power tool use and care
1. Do not force the power tool. Use the correct
power tool for your application.
rate for which it was designed.
2. Do not use the power tool if the switch does
not turn it on and off.
be controlled with the switch is dangerous and
must be repaired.
3. Disconnect the plug from the power source
ments, changing accessories, or storing power
tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
4. Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
5. Maintain power tools and accessories. Check for
age of parts and any other condition that may
the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
6. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
7. Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
8. Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
When using the tool, do not wear cloth work
ment of cloth work gloves in the moving parts may
Battery tool use and care
1.
the manufacturer.
when used with another battery pack.
2.
nated battery packs. Use of any other battery
3. When battery pack is not in use, keep it away
coins, keys, nails, screws or other small metal
terminal to another. Shorting the battery termi-
4.
eyes, additionally seek medical help.
from the battery may cause irritation or burns.
5. Do not use a battery pack or tool that is dam-
-
may exhibit unpredictable behaviour resulting in
6.
perature above 130 °C may cause explosion.
7. Follow all charging instructions and do not
charge the battery pack or tool outside the
tions. Charging improperly or at temperatures
1.
- repair person using only identical replacement
parts.
tool is maintained.
2.
of battery packs should only be performed by the
manufacturer or authorized service providers.
3. Follow instruction for lubricating and chang-
ing accessories.
Cordless circular saw safety
-
warnings
Cutting procedures
1. DANGER: Keep hands away from cutting
area and the blade. Keep your second hand
on auxiliary handle, or motor housing. If both
hands are holding the saw, they cannot be cut by
the blade.
2. Do not reach underneath the workpiece.
guard cannot protect you from the blade below the
workpiece.
3.
the workpiece. Less than a full tooth of the blade
teeth should be visible below the workpiece.
4.
across your leg while cutting. Secure the
workpiece to a stable platform. It is important to
-
support the work properly to minimise body expo-
sure, blade binding, or loss of control.
-
5. Hold the power tool by insulated gripping
surfaces, when performing an operation where
-
the cutting tool may contact hidden wiring or
its own cord.
and could give the operator an electric shock.
4 ENGLISH
-
-
Service