Cisco 7821 User Manual page 9

Click on Voice at the top navigation menu.
Click on Provisioning sub menu.
You can use TFTP or HTTP protocols in order to Auto Provision your Cisco SPA device.
Choose which protocol you want to use:
- TFTP
- HTTP
TFTP
In the Profile Rule field enter tftp:// followed by Hostname or IP Address, followed then by
/$MA.cfg.
- Example for Hostname: tftp://voip.bicomsystems.com/$MA.cfg
- Example for IP Address: tftp://10.1.70.150/$MA.cfg
Click on Submit and wait 35 seconds. The phone may reboot.
Auto provisioning process will start during device reboot process, device will pickup
appropriate configuration file from PBXware. If everything is done as above described, you
should have successfully registered your device to PBXware.
HTTP
This chapter describes how to use HTTP protocol in order to register Cisco SPA device.
Your PBXware needs to be configured correctly for HTTP to work. Please make sure that HTTP
username and HTTP passwords are set in Auto provisioning section in Settings ->
Servers/Tenants -> Server/Tenant name [edit]. Contact your PBXware administrator. Bicom
Systems can provide service to set up this for you.
NOTE: