Cisco 7821 User Manual page 4

device.
The following topics are covered:
- UAD Settings
- Creating Extension
- Registering Device
UAD Settings
1. Login to PBXware web administration interface
Open a new browser window and enter the IP address in order to access the PBXware web
administration login screen. Example: http://192.168.1.10
Login to PBXware with your e-mail address and password.
2. UAD settings
Navigate to Settings:UAD.
Make sure Cisco 7821 UAD is enabled. To check the UAD status click on the edit icon
corresponding to your Cisco phone.
Make sure Status is set to Active, Auto provisioning is set to No, and DHCP is set to Yes.
Click on the Save button to save changes.
UAD settings
Creating Extension
1. Add Extension
Navigate to Extensions. Click on Add Extension.
The standard options window will be shown below.
Select Cisco 7821 phone model from the UAD select box.
Select Location: Local or Remote.
Local is for all extensions registered on the LAN and Remote is for all extensions
registered from remote networks, WAN, Internet etc.
Click on the Next step button.
2. Extension values
Enter values into the required field text boxes.