Cisco 7821 User Manual page 10

In the Profile Rule field enter:
- Example for Hostname using HTTP: [--uid http-username --pwd
http-password]http://voip.bicomsystems.com/prov/$MA.cfg
- Example for IP Address using HTTP: [--uid http-username --pwd
http-password]http://10.1.70.150/prov/$MA.cfg
Make sure you replace Hostname or IP Address from this example with your PBXware
Hostname or IP address.
Make sure to replace http-username and http-password with Your server http username
and password.
Click on Submit and wait 35 seconds. The phone may reboot.
Auto provisioning process will start during phone reboot process, phone will pickup
appropriate configuration file from PBXware. If everything is done as above described, you
should have successfully registered your phone to PBXware.
Retrieved from "http://wiki.bicomsystems.com/Cisco_7821"
Disclaimers - About Bicom Systems Wiki