Attaching the Monitor to a Mount
...with the Measurement Server Attached to an M3015A/M3016A
Measurement Server Extension
The Measurement Server can be used in conjunction with a Measurement Server
Extension.When the Measurement Server is used together with a Measurement Server
Extension, CO
may be measured.
An M3015A/M3016A Measurement Server Extension must be used with a M3000A/
M3001A Measurement Server. The Extension does not function alone.
Attach the Measurement Server to the Measurement Server Extension by sliding it into the
grooves on the Measurement Server Extension and clicking it into place.
Attach the combination of Measurement Server Extension and Measurement Server to the
Monitor exactly as described above for the Measurement Server, by sliding the Extension
into the grooves on the Monitor and clicking it into place.
Attaching the Monitor to a Mount
Step 1
Step 2
Detaching the Monitor from a Mount
Step 1
Step 2
Step 3
74
, a second temperature (TEMP) and/or a second invasive pressure (PRESS)
2
Make sure the front of the Monitor is facing the front of the mount. The front of the
mount has a blue button in the center.
Lower the Monitor onto the mount until the feet of the Monitor click into the mount.
Press and hold in the button (indicated by the arrow) on the front of the mounting .
Lift the Monitor away from the mount:
Release the button.
Installing the Instrument