Screwed Directly To A Wall - Philips M3001A Service Manual

Installing the Tilt/Swivel Mount (M3080A #A14)

Screwed Directly to a Wall

This option is used to mount the Monitor on a wall but to also provide tilt and swivel
capability. To mount the assembly securely, you need 3 screws. These are not provided
because the type of surface dictates the type of screw used.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Hang the bed hanger over the rail.
102
Adapter
Plate
Unpack the Tilt/Swivel mount and check all parts are available.
Remove the adapter plate (this is only necessary for the GCX Wall Channel).
Secure the rail to the Tilt/Swivel mount with the 2 screws provided.
Select 3 screws (appropriate to surface material).
Insert the 3 screws through the screw holes provided in the plate.
Tighten the screws to secure the mount to the wall.
Use adjustment knobs to adjust to the required tilt/swivel angle.
Rail
Installing the Instrument