Mainstream Co 2 Features - Philips M3001A Service Manual

Mainstream CO
This illustration shows the user controls on the Server and the connector for the mainstream
CO
following the illustration:
Mainstream CO
The two calibration marks are located at 10% and 60% of wave channel height. The lower
calibration mark is labelled 0 mmHg (0.0 kPa) on all scales. The upper one is adjustable from
20 mmHg (2kPa) to 100 mmHg (13 kPa) in steps of 10 mmHg (1kPa).
CO
Measurement Mode
In the measurement mode, the Extension continuously measures CO
calculates medical parameters.
• N
rection to CO
and N
If N
it is assumed that the gas mixture consists mainly of O
tions).
Introduction to the Instrument
Features
2
measurement transducer on the Extension. The parts are described in the paragraphs
2
Wave
2
2
40
0
O Correction—This can be turned on or off. If N
2
is made. In this case, it is assumed that the gas mixture consists mainly of O
2
(respiratory intensive care unit conditions).
2
O correction is on, oxygen and N
2
Mainstream CO
Connector for a
mainstream CO
2
transducer.
O correction is off, only oxygen cor-
2
O correction to the CO value is made. In this case,
2 2
and N O (operating room condi-
2 2
Measurement
2
concentration and
2
2
57