Introducing The Instrument Components - Philips M3001A Service Manual

M3/m4 monitors,measurement server,measurement server extensions
Table of Contents

Advertisement

Introducing the Instrument Components

Functional
Description
Introducing the Instrument Components
The M3046A Compact Portable Patient Monitor together with the Multi-Measurement
Server (M3000A or M3001A) and the M3015A and M3016A Measurement Server
Extensions forms a flexible, portable, battery or line powered patient monitor. The combined
devices are referred to as the Instrument in this manual.
The M3000A Multi-Measurement Server can be used with M3046A patient monitors up to
and including Release D, but is incompatible with Release E monitors. All equipment from
Release C and D (M3046A monitors and the Release C M3000A Measurement Server) must
be used in monitoring configurations where only Release B, C or D software equipment is
included. None of these parts are compatible with Release A software.
The M3001A Multi-Measurement Server is compatible only with the Release E M3046A
monitors, and is incompatible with any earlier releases.
The Hemodynamic Extension M3012A is for use together with the Multi-Measurement
Server M3001A. This combination supports the transfer of patient data between IntelliVue
(M80xxA) and M3/M4 (M3046A, Revision E) monitors. The M3012A's Pressure/
Temperature channel works in the same way as that of the M3001A, with which the M3012A
shares all specifications, as documented in the M3/M4 Instructions for Use, except for the
weight, which is 450g (0.99lb). See the table below for supported parameters. The M3012A
is not further covered in this Service Guide.
To check which software revisions are on your equipment, enter Setup and select
Revisions.
The Multi-Measurement Server and Server Extensions acquire the following physiological
signals:
Measurement
Server/Server
Extension
withOption
!
M3000A
!
M3000A #C06
!
M3001A
2
The functional description of a component uses a diagram of the circuitry
followed by short, written explanations of the component circuitry.
Measurements
!
!
!
"
!
!
!
"
!
!
!
!
"
"
"
"
!
!
"
"
"
"
"
"
Compatible with
which M3046A
Release?
D and
E
lower
!
"
!
"
!
"
Introduction to the Instrument

Advertisement

Table of Contents
loading

This manual is also suitable for:

M3000aM3046aM3015aM3016a

Table of Contents