Wiring Diagram - Makita 9556HN Technical Information

W
iring diagram
[1] Connecting Lead Wires of Power Supply Cord with Switch
Connect the lead wires with Switch as illustrated in Fig. 12.
Fig. 12
[When Spacer is used]
Power supply cord
Switch button
Switch
[2] Wiring of Field Lead Wires in the Rear of Motor Housing
[2] -1. Rear End
Route Field lead wires as illustrated in Figs. 13 - 16.
Fig. 13
[Lead Wires of Field]
Lead wire (black)
Field
Lead wire (white)
Spacer
Earth terminal on the lead wire (clear)
of Noise suppressor* has to be connected
to this portion.
Switch lever
Lead wire (black)
Connect to Brush holder B.
[When Spacer is not used]
[Motor Housing with Field]
(view from Rear cover side)
Brush holder A
Spindle
*Some countries do not use noise suppressor.
P 6/ 8
Connect to Brush holder A.
Lead wire
(black)
Lead wire (white)
Connect to
Switch terminals.
Brush holder B