Makita 9557HN Instruction Manual
Hide thumbs
Also See for 9557HN:
- Instruction manual (88 pages) ,
- Technical information (8 pages) ,
- Instruction manual (53 pages)
Related Manuals for Makita 9557HN
Summary of Contents for Makita 9557HN
- Page 1 INSTRUCTION MANUAL Angle Grinder 9556HN 9557HN 9558HN 005801 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Specifications may differ from country to country. • Weight according to EPTA-Procedure 01/2003 END202-6 For Model 9557HN ENG102-3 Symbols Noise The following show the symbols used for the equipment. - Page 3 Power tool plugs must match the outlet. Never Makita Corporation responsible modify the plug in any way. Do not use any manufacturer declare that the following Makita adapter plugs with earthed (grounded) power machine(s): tools. Unmodified plugs and matching outlets will Designation of Machine: reduce risk of electric shock.
-
Page 4: Grinder Safety Warnings
moving parts. Damaged or entangled cords 19. Do not use the power tool if the switch does increase the risk of electric shock. not turn it on and off. Any power tool that cannot When operating a power tool outdoors, use an be controlled with the switch is dangerous and extension cord suitable for outdoor use. - Page 5 personal injury. hidden wiring or its own cord. Cutting Do not use accessories which are not accessory contacting a "live" wire may make specifically designed and recommended by exposed metal parts of the power tool "live" and the tool manufacturer. Just because the shock the operator.
- Page 6 c) Do not position your body in the area where hold the power tool motionless until the wheel power tool will move if kickback occurs. comes to a complete stop. Never attempt to Kickback will propel the tool in direction opposite to remove the cut-off wheel from the cut while the the wheel’s movement at the point of snagging.
-
Page 7: Functional Description
21. Before using the tool on an actual workpiece, to safety rules for the subject product. MISUSE or let it run for a while. Watch for vibration or failure to follow the safety rules stated in this wobbling that could indicate poor installation instruction manual may cause serious personal or a poorly balanced wheel. - Page 8 When using an abrasive cut-off / diamond wheel, • ASSEMBLY be sure to use only the special wheel guard designed for use with cut-off wheels. (In European countries, when using a diamond wheel, the CAUTION: ordinary guard can be used.) Always be sure that the tool is switched off and •...
-
Page 9: Operation
Operation with abrasive cut-off / diamond OPERATION wheel (optional accessory) WARNING: 1. Lock nut It should never be necessary to force the tool. The • 2. Abrasive cut-off weight of the tool applies adequate pressure. wheel/diamond Forcing and excessive pressure could cause wheel 3. -
Page 10: Maintenance
100 mm (4") Abrasive cut-off wheel Diamond wheel Thickness: Less than 4 mm (5/32") Thickness: 4 mm (5/32") or more Thickness: Less than 4 mm (5/32") Thickness: 4 mm (5/32") or more 16 mm (5/8") 16 mm (5/8") 20 mm (13/16") 20 mm (13/16") 1. - Page 11 Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Wheel guard (Wheel cover) For depressed center • wheel / Multi disc Wheel guard (Wheel cover) For abrasive cut-off •...
- Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 884836C229...