Makita ST113D Instruction Manual page 7

3. Load staples into the main magazine with their
feet facing up.
1. Staples 2. Main magazine
4. After loading staples, push back the sub-maga-
zine in place until it clicks.
reverse.
Hook
CAUTION:
Do not hang the hook from the
waist belt. Dropping the stapler, which is caused by
the hook accidentally coming out of place, may cause
housing on either side and then secure it with a screw.
2
3
1. Groove 2. Hook 3. Screw
1
2
1
OPERATION
Testing the safety system
WARNING:
Make sure all safety systems are
in working order before operation. Failure to do
so may cause personal injuries.
1
2
1.
element 4. Sub magazine
as follows.
1.
magazine opened.
2. Install the battery cartridge.
3. Only pull the switch trigger without touching the
contact element against the material.
4. Only touch the contact element against the mate-
rial without pulling the switch trigger.
If the tool operates in the case of 3 and 4 above, the
safety systems are faulty. Stop using the tool immedi-
ately and ask your local service center.
Driving staples
WARNING:
Continue to place the contact
driven completely.
1
2
1. Switch trigger 2. Contact element 3. Front part
4. Rear part
7 ENGLISH
3
2. Switch trigger 3. Contact
3
4
4