Makita ST113D Instruction Manual page 6

1
1.
B
the trigger-lock button is provided.
from A side.
After use, always press in the trigger-lock button from
B side.
Lighting up the lamp
CAUTION:
Do not look in the light or see the
source of light directly.
1
1. Lamp
ing the switch trigger or actuating the contact element.
releasing the switch trigger and the contact element.
2
2. Switch trigger
A
NOTE:
the lamp. Be careful not to scratch the lens of lamp, or
it may lower the illumination.
ASSEMBLY
CAUTION:
Always make sure that the battery
cartridge is removed before carrying out any work
on the stapler.
Staples
CAUTION:
Do not use staples other than
designated in this manual or staples that appear
to be damaged, bent, rusty or corroded.
CAUTION:
Load the same type, size and
uniform length of staples when loading multiple
strips of staples in the magazine.
NOTICE:
Handle the staples and their box care-
fully. If the staples have been handled roughly,
they may be bent out of shape, causing poor
staple feed or jamming.
NOTICE:
Avoid storing the staples in a very
humid or hot place or place exposed to direct
sunlight.
Loading staples
WARNING:
make sure that the battery cartridge is removed
from the stapler.
CAUTION:
After loading staples, make sure
that the sub magazine is surely closed. Falling
the operator or bystander, especially when working in
high locations.
1. Remove the battery cartridge.
2.
zine backward.
-
1. Locking lever 2. Sub magazine
6 ENGLISH
When loading staples, always
1
-
2