Provisioning Parameters
•
•
•
•
•
•
Provisioning Parameters Overview
This chapter describes the provisioning parameters that can be used in configuration profile scripts.
Configuration Profile Parameters
The following table defines the function and usage of each parameter in the Configuration Profile Parameters
section under the Provisioning tab.
Parameter Name
Provision Enable
Resync On Reset
Description and Default Value
Controls all resync actions independently of firmware upgrade actions. Set to
Yes to enable remote provisioning.
The default value is Yes.
Triggers a resync after every reboot except for reboots caused by parameter
updates and firmware upgrades.
The default value is Yes.
C H A P T E R
Cisco IP Phone 6800 Series Multiplatform Phones Provisioning Guide
5
63