Cisco 6800 Series Provisioning Manual page 74

Macro Expansion Variables
• GPP_* (under specific conditions)
Within these parameters, syntax types, such as $NAME or $(NAME), are recognized and expanded.
Macro variable substrings can be specified with the notation $(NAME:p) and $(NAME:p:q), where p and q
are non-negative integers (available in revision 2.0.11 and above). The resulting macro expansion is the
substring starting at character offset p, with length q (or else till end-of-string if q is not specified). For example,
if GPP_A contains ABCDEF, then $(A:2) expands to CDEF, and $(A:2:3) expands to CDE.
An unrecognized name is not translated, and the $NAME or $(NAME) form remains unchanged in the
parameter value after expansion.
Parameter Name
$
A through P
SA through SD
MA
MAU
MAC
PN
PSN
SN
CCERT
IP
EXTIP
SWVER
HWVER
Cisco IP Phone 6800 Series Multiplatform Phones Provisioning Guide
68
Description and Default Value
The form $$ expands to a single $ character.
Replaced by the contents of the general purpose parameters GPP_A
through GPP_P.
Replaced by special purpose parameters GPP_SA through GPP_SD.
These parameters hold keys or passwords used in provisioning.
$SA through $SD are recognized as arguments to the optional
Note
resync URL qualifier, --key.
MAC address using lower case hex digits, for example, 000e08aabbcc.
MAC address using upper case hex digits, for example
000E08AABBCC.
MAC address using lower case hex digits, and colons to separate hex
digit pairs, for example 00:0e:08:aa:bb:cc.
Product Name. For example, CP-6841-3PCC.
Product Series Number. For example, 6841-3PCC.
Serial Number string, for example 88012BA01234.
SSL Client Certificate status: Installed or Not Installed.
IP address of the phone within its local subnet, for example
192.168.1.100.
External IP of the phone, as seen on the Internet, for example
66.43.16.52.
Software version string. For example, sip78xx.11-0-1MPP.
Hardware version string, for example 2.0.1
Provisioning Parameters