Data Types - Cisco 6800 Series Provisioning Manual

Data Types

Data Types

These data types are used with configuration profile parameters:
• {a,b,c,...}—A choice among a, b, c, ...
• Bool—Boolean value of either "yes" or "no."
• CadScript—A miniscript that specifies the cadence parameters of a signal. Up to 127 characters.
• DialPlanScript—Scripting syntax that is used to specify Line 1 and Line 2 dial plans.
• Float<n>—A floating point value with up to n decimal places.
• FQDN—Fully Qualified Domain Name. It can contain up to 63 characters. Examples are as follows:
• FreqScript—A miniscript that specifics the frequency and level parameters of a tone. Contains up to
Cisco IP Phone 6800 Series Multiplatform Phones Provisioning Guide
28
Syntax: S [;S ], where:
1 2
◦ S =D (on /off [,on
i i i,1 i,1 i,2
section.
◦ on and off are the on/off duration in seconds of a segment. i = 1 or 2, and j = 1 to 6.
i,j i,j
◦ D is the total duration of the section in seconds.
i
All durations can have up to three decimal places to provide 1 ms resolution. The wildcard character "*"
stands for infinite duration. The segments within a section are played in order and repeated until the
total duration is played.
Example 1:
60(2/4)
Number of Cadence Sections = 1
Cadence Section 1: Section Length = 60 s
Number of Segments = 1
Segment 1: On=2s, Off=4s
Total Ring Length = 60s
Example 2—Distinctive ring (short,short,short,long):
60(.2/.2,.2/.2,.2/.2,1/4)
Number of Cadence Sections = 1
Cadence Section 1: Section Length = 60s
Number of Segments = 4
Segment 1: On=0.2s, Off=0.2s
Segment 2: On=0.2s, Off=0.2s
Segment 3: On=0.2s, Off=0.2s
Segment 4: On=1.0s, Off=4.0s
Total Ring Length = 60s
• sip.Cisco.com:5060 or 109.12.14.12:12345
• sip.Cisco.com or 109.12.14.12
127 characters.
/off [,on /off [,on /off
i,2 i,3 i,3 i,4 i,4
Provisioning Scripts
[,on /off [,on /off ]]]]]) and is known as a
i,5 i,5 i,6 i,6