Cisco Ip Phone 6800 Series Multiplatform Phones Provisioning Guide - Cisco 6800 Series Provisioning Manual

Data Types
The section Z
by a frequency components parameter: Z
[,on
If more than one frequency component is used in a segment, the components are summed together.
Example 1—Dial tone:
350@-19,440@-19;10(*/0/1+2)
Number of Frequencies = 2
Frequency 1 = 350 Hz at –19 dBm
Frequency 2 = 440 Hz at –19 dBm
Number of Cadence Sections = 1
Cadence Section 1: Section Length = 10 s
Number of Segments = 1
Segment 1: On=forever, with Frequencies 1 and 2
Total Tone Length = 10s
Example 2—Stutter tone:
350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)
Number of Frequencies = 2
Frequency 1 = 350 Hz at –19 dBm
Frequency 2 = 440 Hz at –19 dBm
Number of Cadence Sections = 2
Cadence Section 1: Section Length = 2s
Number of Segments = 1
Segment 1: On=0.1s, Off=0.1s with Frequencies 1 and 2
Cadence Section 2: Section Length = 10s
Number of Segments = 1
Segment 1: On=forever, with Frequencies 1 and 2
Total Tone Length = 12s
• Uns<n>—Unsigned n-bit value, where n = 8, 16, or 32. It can be specified in decimal or hex format,
such as 12 or 0x18, as long as the value can fit into n bits.

Cisco IP Phone 6800 Series Multiplatform Phones Provisioning Guide

30
is similar to the S
1
/off /f [,on /off /f ]]]]]) where:
i,5 i,5 i,5 i,6 i,6 i,6
◦ f = n [+n ]+n [+n [+n [+n
i,j 1 2 3 4 5
◦ 1 < n < 6 specifies the frequency components in the FreqScript that are used in that segment.
k
section in a CadScript, except that each on/off segment is followed
1
= D (on /off /f [,on
1 1 i,1 i,1 i,1
]]]]].
6
Provisioning Scripts
/off /f [,on /off /f [,on
i,2 i,2 i,2 i,3 i,3 i,3
/off /f
i,4 i,4 i,4