Cisco 6800 Series Provisioning Manual page 75

Provisioning Parameters
Parameter Name
PRVST
UPGST
UPGERR
PRVTMR
UPGTMR
REGTMR1
REGTMR2
UPGCOND
SCHEME
SERV
SERVIP
PORT
PATH
ERR
UIDn
EMS
Description and Default Value
Provisioning State (a numeric string):
-1 = explicit resync request
0 = power-up resync
1 = periodic resync
2 = resync failed, retry attempt
Upgrade State (a numeric string):
1 = first upgrade attempt
2 = upgrade failed, retry attempt
Result message (ERR) of previous upgrade attempt; for example http_get
failed.
Seconds since last resync attempt.
Seconds since last upgrade attempt.
Seconds since Line 1 lost registration with SIP server.
Seconds since Line 2 lost registration with SIP server.
Legacy macro name.
File access scheme, one of TFTP, HTTP, or HTTPS, as obtained after
parsing resync or upgrade URL.
Request target server host name, as obtained after parsing resync or
upgrade URL.
Request target server IP address, as obtained after parsing resync or
upgrade URL, possibly following DNS lookup.
Request target UDP/TCP port, as obtained after parsing resync or
upgrade URL.
Request target file path, as obtained after parsing resync or upgrade
URL.
Result message of resync or upgrade attempt. Only useful in generating
result syslog messages. The value is preserved in the UPGERR variable
in the case of upgrade attempts.
The contents of the Line n UserID configuration parameter.
Extension Mobility Status
Cisco IP Phone 6800 Series Multiplatform Phones Provisioning Guide
Macro Expansion Variables
69