Cisco catalyst 6500 series Configuration Note page 32

CSM Networking Topologies
Configuring the Secure (Router) Mode
In secure (router) mode, the client-side and server-side VLANs are on different subnets.
To configure content switching in secure (router) mode, perform this task:
Command
Step 1
Router(config-module-csm)# vlan database
Step 2
Router(vlan)# vlan 2
Step 3
Router(vlan)# vlan 3
Step 4
Router(vlan)# exit
Step 5
Router(config-module-csm)# vlan 2 client
Step 6
Router(config-slb-vlan-client)# ip addr
192.158.38.10 255.255.255.0
Step 7
Router(config-slb-vlan-client)# gateway
192.158.38.20
Step 8
Router(config-slb-vlan-client)# gateway
192.158.38.21
Step 9
Router(config-module-csm)# vlan 3 server
Step 10
Router(config-slb-vlan-server)# ip addr
192.158.39.10 255.255.255.0
Step 11
Router(config-slb-vlan-server)# exit
Step 12
Router(config-module-csm)# vserver VIP1
Step 13
Router(config-slb-vserver)# virtual
192.158.38.30 tcp www
Step 14
Router(config-slb-vserver)# serverfarm
farm1
Step 15
Router(config-module-csm)# inservice
1.
2.
3.
Note Set the server's default routes to the CSM's IP address (192.158.39.10).
CSM Networking Topologies
This section describes CSM networking topologies and contains these sections:
•
•
Catalyst 6500 Series Content Switching Module Configuration Note
2-4
Enter the exit command to leave a mode or submode. Enter the end command to return to the menu's top level.
The no form of this command restores the defaults.
This step assumes that the server farm has already been configured. (See the
page 5-1.)
CSM Inline, MSFC Not Involved, page 2-5
CSM Inline, MSFC on Server Side, page 2-5
Chapter 2 Networking with the Content Switching Module
Purpose
1
Enters the VLAN mode .
Configures a client-side VLAN
Configures a server-side VLAN.
Exits the mode for the configuration to take effect.
Creates the client-side VLAN 2 and enters the SLB
VLAN mode.
Assigns the CSM IP address on VLAN 2.
Defines the client-side VLAN gateway to Router A.
Defines the client-side VLAN gateway to Router B.
Creates the server-side VLAN 3 and enters the SLB
VLAN mode.
Assigns the CSM IP address on VLAN 3.
Exits the submode.
Creates a virtual server and enters the SLB virtual
server mode.
Creates a virtual IP address.
Associates the virtual server with the server farm
Enables the server.
"Configuring Server Farms" section on
2
.
3
.
OL-4612-01