Cisco catalyst 6500 series Configuration Note page 29

Networking with the Content Switching Module
This chapter describes networking the CSM and contains these sections:
•
•
•
•
Configuring Modes for Networking
You can configure the CSM in a single subnet or bridged mode and a secure or router mode. These
sections describe the modes:
•
•
Configuring the Single Subnet (Bridge) Mode
In the single subnet (bridge) mode configuration, the client-side and server-side VLANs are on the same
subnets.
OL-4612-01
Configuring Modes for Networking, page 2-1
CSM Networking Topologies, page 2-4
Routing with the CSM, page 2-7
Protecting Against Denial-of-Service Attacks, page 2-8
Configuring the Single Subnet (Bridge) Mode, page 2-1
Configuring the Secure (Router) Mode, page 2-4
Figure 2-1 shows how the single subnet (bridge) mode configuration is set up.
C H A P T E R
Catalyst 6500 Series Content Switching Module Configuration Note
2
2-1