Cisco catalyst 6500 series Configuration Note page 176

Backup Server Farm
TCP_WND_SIZE_OPTION
VSERVER_ICMP_ALWAYS_RESPOND
XML_CONFIG_AUTH_TYPE
# The variable that you want to change is AGGREGATE_BACKUP_SF_STATE_TO_VS
Cat6k-2#
1d21h: %CSM_SLB-6-RSERVERSTATE: Module 5 server state changed: SLB-NETMGT: Server
10.20.220.20 failed ARP request
Cat6k-2#
# The CSM has refreshed the ARP entry for 10.20.220.20 which is now reported in the failed
state.
Cat6k-2# conf t
Enter configuration commands, one per line.
Cat6k-2(config)# mod csm 5
Cat6k-2(config-module-csm)# var AGGREGATE_BACKUP_SF_STATE_TO_VS 1
Cat6k-2(config-module-csm)#
Cat6k-2(config-module-csm)# end
1d21h: %SYS-5-CONFIG_I: Configured from console by vty0 (10.20.1.100)
Cat6k-2# show mod csm 5 var
variable
----------------------------------------------------------------
ARP_INTERVAL
ARP_LEARNED_INTERVAL
ARP_GRATUITOUS_INTERVAL
ARP_RATE
ARP_RETRIES
ARP_LEARN_MODE
ARP_REPLY_FOR_NO_INSERVICE_VIP
ADVERTISE_RHI_FREQ
AGGREGATE_BACKUP_SF_STATE_TO_VS 1
DEST_UNREACHABLE_MASK
FT_FLOW_REFRESH_INT
GSLB_LICENSE_KEY
HTTP_CASE_SENSITIVE_MATCHING
MAX_PARSE_LEN_MULTIPLIER
NAT_CLIENT_HASH_SOURCE_PORT
ROUTE_UNKNOWN_FLOW_PKTS
NO_RESET_UNIDIRECTIONAL_FLOWS
SYN_COOKIE_INTERVAL
SYN_COOKIE_THRESHOLD
TCP_MSS_OPTION
TCP_WND_SIZE_OPTION
VSERVER_ICMP_ALWAYS_RESPOND
XML_CONFIG_AUTH_TYPE
Cat6k-2# show mod csm 5 vserver detail
WEB, type = SLB, state = OPERATIONAL, v_index = 18
virtual = 10.20.221.100/32:80 bidir, TCP, service = NONE, advertise = FALSE
idle = 3600, replicate csrp = none, vlan = ALL, pending = 30, layer 4
max parse len = 2000, persist rebalance = TRUE
ssl sticky offset = 0, length = 32
conns = 0, total conns = 14
Default policy:
server farm = WEBFARM, backup = WEBFARM2 (no sticky)
sticky: timer = 0, subnet = 0.0.0.0, group id = 0
Policy
-----------------------------------------------------
(default)
Catalyst 6500 Series Content Switching Module Configuration Note
A-22
8192
false
Basic
value
300
14400
15
10
3
1
0
10
0xffff
15
(no valid license)
1
1
0
0
0
3
5000
1460
8192
false
Basic
Tot matches Client pkts
14 83
Appendix A
End with CNTL/Z.
Server pkts
70
Configuration Examples
OL-4612-01