CSM XML Document Type Definition
You can use this DTD to configure the CSM as described in the
on page
The CSM XML Document Type Definition (DTD) is as follows:
<!--
/*
*
cisco_csm.dtd - XML DTD for CSM 3.2
*
*
January 2002
*
*
Copyright (c) 2002, 2003 by cisco Systems, Inc.
*
All rights reserved
*/
-->
<!--
Notes:
Each element refers to a particular IOS CLI command.
Each attribute refers to a command parameter.
Except where noted, all "name" attributes are strings of length
1 to 15, with no whitespace.
IP address and mask attributes use standard "x.x.x.x" format.
-->
<!--
*************************************************************
Elements and attributes required by various other elements
*************************************************************
-->
<!ELEMENT inservice EMPTY>
<!ATTLIST inservice
sense (yes | no) #IMPLIED
>
<!ELEMENT inservice_standby EMPTY>
<!ATTLIST inservice_standby
sense (yes | no) #IMPLIED
>
<!--
backup_name is a string of length 1 to 15
backup_sticky default is "no"
-->
<!ELEMENT serverfarm_ref EMPTY>
<!ATTLIST serverfarm_ref
sense
OL-4612-01
8-13.
Paul Mathison
(yes | no) #IMPLIED
A P P E N D I X
"Configuring the XML Interface" section
Catalyst 6500 Series Content Switching Module Configuration Note
C
C-1