IMPORTANT
You can set the Book Frame Erase mode only for the original paper sizes shown on the touch
panel display.
3
Press [Done].
Making Copies by Erasing Binding Holes (Binding Erase)
IMPORTANT
• Do not place originals with binding holes in the feeder, as this may damage the originals.
• When using the Binding Erase mode, the borders you do not select are also erased by 4 mm.
1
Press [Process/Layout]
IMPORTANT
Place your original on the platen glass.
2
Press [Binding Erase]
original.
The border is where the binding holes are located on the original, if you visualize the original as
being face up.
3
Press [Done].
[Frame Erase].
designate the area of the binding holes on the
Process/Layout Settings
7
7-75