IMPORTANT
• You can use the Memory RX Inbox function for receiving and storing I-fax documents only if the Color
Universal Send Kit (standard-equipped for the iR C4580i/iR C4080i) is activated.
• You can use the Memory RX Inbox function for receiving and storing fax documents only if the optional
Super G3 FAX Board is installed.
• If you want to use Memory Lock, you must first set Use Fax Memory Lock and Use I-Fax Memory Lock
to 'On' in Memory RX Inbox Settings. To access the Memory RX Inbox Settings screen, press
[System Settings]
Sending and Facsimile Guide.)
Receiving Documents through Fax or I-Fax
1
Set Memory Lock to 'On' from the Additional Functions screen.
NOTE
• For instructions on setting the I-Fax Memory Lock and Fax Memory Lock modes, see Chapter
11, "System Manager Settings," in the Sending and Facsimile Guide.
• The following messages are displayed while Memory Lock is being set to 'On':
- <I-Fax Memory RX is on.>:I-Fax documents will be received in memory
- <Fax Memory RX is on.>:Fax documents will be received in memory
2
The machine is now ready to receive documents in memory.
NOTE
The message <Check the Memory RX doc.> is displayed when a document is received in the
Memory RX Inbox:
[Communications Settings]. (See Chapter 11, "System Manager Settings," in the
6-3
Memory RX Inbox
6