Cover/Job Separator - Canon CLC5151 Copying And Mail Box Manual

Cover/Job Separator

If you select multiple documents and set the Merge Documents mode, you can specify the
Cover/Job Separator mode. The Cover/Job Separator mode automatically adds front and back
covers, or job separator sheets to divide each document, using a different type of paper from
that used for the main document.
IMPORTANT
• For information on the modes which cannot be set in combination with this mode, see "Unavailable
Combination of Functions," on p. 9-6.
• You can set the Cover/Job Separator mode only if you select multiple documents and set the Merge
4
Documents mode. (See "Merging Documents," on p. 3-60.)
• You cannot print on the job separator sheets.
• If you select the Staple mode when the optional Finisher-X1 is attached, you cannot staple more than 20
sheets of A3 paper, or 30 sheets of A4 or A4R paper, including sheet insertions.
• If you select the Staple mode when the optional Finisher-W1 or Saddle Finisher-W2 is attached, you
cannot staple more than 30 sheets of A3 or A4R paper, or 50 sheets of A4 paper, including sheet
insertions.
NOTE
• The Cover/Job Separator mode is available for the Mail Box function only.
• Job separator sheets are not counted as prints.
Front Cover/Back Cover
This setting adds a front cover or back cover sheet to each set of prints. You may also print on the front
cover or back cover sheet.
4-18

Cover/Job Separator

Selected Documents Prints
Printed
Front Cover
Printed
Back Cover